Sodium Chloride Injection / Sodium Chloride Infusion / Saline injection
Sodium Chloride (sodium chloride infusion) Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenousadministration. It contains no antimicrobial agents.
Main ingredients: Sodium Chloride
Structural formula: NaCl
Molecular formula: NaCl
Molecular weight: 58.44
0.9% Sodium Chloride Injection
| Specification |
Btl/carton |
Carton size(mm) |
G.W.(kg) |
Quantity per 20ft container |
| 500ml:4.5g |
20 |
415×340×205 |
17 |
985 |
| 250ml:2.25g |
30 |
415×355×185 |
15 |
1008 |
| 100ml:0.9g |
40 |
440×300×150 |
10.7 |
1425 |
| 500ml:4.5g(PP) |
30 |
420×400×240 |
17 |
700 |
| 250ml:2.25g(PP) |
30 |
420×400×166 |
9.5 |
980 |
| 100ml: 0.9g (PP) |
80 |
475×370×250 |
10 |
648 |
| 1000ml:1.9g(Bag) |
20 |
590×460×190 |
22 |
600 |
| 500ml:4.5g(Bag) |
20 |
430×370×200 |
12 |
880 |
| 250ml:2.25g(Bag) |
30 |
460×390×220 |
9.5 |
750 |
| 100ml: 0.9g(Bag) |
60 |
440×280×250 |
8 |
945 |
[Character] The product is a colorless clear liquid, with salt flavor.
[Pharmacology and toxicity]
Sodium chloride is an electrolysis supplement agent; Sodium and chloride are important electrolysis for the human body and mainly exist in extracellular fluid, which play an important role in maintaining normal volume of blood and extracellular fluid and osmosis pressure. Normal serum sodium concentration is about 135~145mmol/L, with a 92 percent of the plasma cation and a 90 percent of total osmosis pressure, so the quantity of plasma sodium play a decisive role for the osmosis pressure; Normal serum chloride concentration is about 98~106mmol/L; Sodium and chloride in human body are mainly adjusted by hypothalamus, lobus posterior hypophyseos and kindney so as to maintain the stability of body fluid volume and osmosis pressure.
[Pharmacokinetics]
Sodium chloride enter the blood circulation directly after injected by intravenous, and distribute widely in the human body, and mainly exist in extracellular fluid. Both sodium and chloride can be filtrated by glomerule, and partially be absorbed by renal tubules. Sodium chloride is mainly excreted through urine by kindney, some is excreted through sweat.
[Indications]
It is indicated for dehydration caused by all kinds of cases, including hypoosmolality, isotonia and hypertonicity; Also for the coma caused by hypertonicity non-ketosis diabetes as the administration of isotonia and hypoosmolality sodium chloride can correct the dehydration and hyperosmotic state; It is also indicated for low-chloride metabolic alkali poisoning; And external use sodium chloride can be used to wash the eyes and wounds; It also can be used for the induction of labor with water bag.
Compound Sodium Chloride Injection
[Indications and Clinical use]: For water loss caused by hypo-osmoticity, isotonicity and hypertonicity.
[Strength]: 500ml: 0.85% Sodium Chloride, 0.03% Potassium Chloride and 0.033% Calcium Chloride
250ml: 0.85% Sodium Chloride, 0.03% Potassium Chloride and 0.033% Calcium Chloride
Name: Compound Sodium Chloride Injection
Characteristics: Colourless and clear liquid; Salty.
Indications: Dehydration caused by various reasons, including hyposmotic dehydration, isosmotic dehydration and hyperosmotic dehydration; Hyperosmotic nonketonic coma; Hypochloremic metabolic alkalosis.
Administration and dosage: (1) Venous infusion, dose given according to diseade condition and weight. Usual dose: 500~1000ml each time. (2) Hypochloremic alkalosis, dose given according to the alkalosis degree.
Contraindication: (1) Edematous disease, such as nephrotic syndrome, liver cirrhosis with ascites, congestive heart failure, acute left heart failure, encephaledema and idiopathic edema etc.
(2) Patients in oliguric stage of acute renal failure or hypourocrinia of chronic renal failure hyporeactive to uragogue.
(3) Hypertension, hyperkalemia.
Dosage and Administration:
(1) In patients with supplementary energy for some reason can not eat or eat to reduce, generally 25 percent to intravenous glucose injection, and at the same time to add body fluids. According to the amount of glucose required for the calculation of heat.
(2) Total parenteral nutrition therapy is the treatment of glucose the most important energy supply material. In the non-energy protein, fat and glucose energy supply ratio was 2: 1. Specific amount based on the clinical need for heat. According to the needs of the volume of fluid infusion, glucose can be prepared for the 25% to 50% of the different concentrations and, if necessary, adding insulin, every 5~10g glucose-insulin-formal accession to the unit 1. Due to the normal application of hypertonic glucose solution, the more provocative vein for fat emulsion infusion, the larger selection of general intravenous drip.
(3) Hypoglycemia can re-use Xianyu 50% glucose injection 20 ~ 40 ml intravenous injection.
(4) For hunger ketosis, severe cases, the application of 5% to 25% of the intravenous injection of glucose, glucose 100g per day can be brought under control the disease.
(5) Isotonic water loss of water to give 5% glucose injection by intravenous drip.
(6) Application of hyperkalemia 10% to 25% injection every 2~4G glucose plus 1 unit regular insulin infusion can reduce serum potassium concentration. However, the only treatment for the extracellular potassium into cells, the body of the total potassium content unchanged. If we do not take potassium row, there is still the possibility of the recurrence of hyperkalemia.
(7) Organizations hypertonic dehydration solution (generally 50% glucose injection) rapid intravenous injection of 20 ~ 50ml and the role of short-lived. Clinical should be taken to avoid high blood sugar, with little current. Peritoneal dialysis fluid for regulating the osmotic pressure, 50% glucose injection 20ml is allows 10g glucose 1L peritoneal dialysis fluid osmotic pressure to raise 55mOsm/kgH2O.
Store at 20 to 25° C
Dispense in a tight, light resistant container with a child resistant closure
Specification: 500m1
Storage: Closed tightly and put in dark place.
Package: Butyl rubber stopper and aluminium cap, polypropylene bottle
Carton packing:
(1)500ml: 30PCS/CTN, 713 CTNS/20'FT, 1532CTNS /40'FT, 1796CTNS /40'HQ
(2)250ml: 30PCS/CTN, 1082 CTNS/20'FT, 2324 CTNS /40'FT, 2725 CTNS /40'HQ
(3)100ml: 80PCS/CTN, 726 CTNS/20'FT, 1559 CTNS/40'FT, 1828 CTNS/40'HQ
Compound Sodium Chloride Injection |
500ml
500ml(PP)
500ml(Flexible Container)
250ml(Flexible Container)
100ml(Flexible Container) |
20
30
20
30
60 |
415×340×205
420×400×240
430×370×200
460×390×220
440×280×250 |
985
700
880
750
945 |
17
17
12
9.5
8 |
Service we can provide:
1. Mixed container, we can mix different items in one container.
2. Quality control, before shipment, free sample for test. After shipment, keep sample for 3 years
3. Prompt shipment with professional documents
4. Packing as your request, with photo before shipment
« « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « « «
To get more information, just feel free to contact with us. Thanks.
Mr. Liu
Qingdao fraken international trading Co., Ltd
Address: RM1005 post mansion yan'an three road, qingdao, China
Web: http://fraken.en.made-in-china.com
Audited Supplier 
){kind=link}